Preparation of Fe−Co−LDH/MXene modified electrode for sensitive determination of arsenic (III) in aquatic system

3-dimensional (3D) Fe−Co−LDH/MXene composite was synthesized by in-situ synthesis and assembly of Fe−Co−LDH rod around MXene under hydrothermal condition. Due to the unique 3D configuration and good conductivity, the obtained Fe−Co−LDH/MXene modified glassy carbon electrode (Fe−Co−LDH/MXene/GCE) showed excellent electrochemical activity for As(III) detection. Via square-wave anodic stripping voltammetry, the response current on Fe−Co−LDH/MXene/GCE had good linear relationship with As(III) concentrations (1∼1000 ppt) with superior sensitivity (0.22 μA ppt⁻¹ cm⁻²) and low detection limit (0.9 ppt). The mechanism of As(III) adsorption was demonstrated. The electrode showed excellent anti-interference ability. Real water sample analysis demonstrated the Fe−Co−LDH/MXene/GCE was deployable in aqua-system.     

Simultaneous electrochemical determination of hydrazine and nitrite based on Au nanoparticles decorated on the poly(Nile Blue) modified carbon nanotube

In this study, simultaneous determination of toxic hydrazine and nitrite was performed on composite electrodes of poly(Nile blue)(NB), carbon nanotube(CNT) and gold nanoparticles(AuNPs). The prepared AuNPs/CNT/poly(NB)/GCE was used for as a sensor platform for individual and simultaneous determination of hydrazine and nitrite. Electrodes were characterized by HRTEM, SEM, XPS, EIS. The LOD for nitrite and hydrazine was 5.0 μM and 3.1 μM at AuNP/CNT/poly(NB)/GCE, respectively. Also, sensitive amperometric determinations of hydrazine and nitrite were performed and LOD were calculated as 0.33 μM and 0.68 μM, respectively. The method was applied to sausage and river water samples and recovery results were obtained in the range 85–115 %.     

Synthesis of polyaspartic acid-glycidyl adduct and evaluation of its scale inhibition performance and corrosion inhibition capacity for Q235 steel applications

In this work, the development of the eco-friendly comprehensive scale and corrosion inhibitor based on green polyaspartic acid (PASP) was presented. In this view, PASPG was prepared by a ring-opening graft modification reaction of polysuccinimide (PSI) with glycidyl. In addition, the molecular structure and the thermal stability of PASPG were characterized by using three different methods (FTIR, ¹H NMR, and TGA). PASPG’s scale inhibition efficiency and corrosion inhibition efficiency were also evaluated, respectively. More concretely, the scale inhibition efficiency of PASPG achieved 94.6 % and 95.1 % for CaCO₃ and CaSO₄, respectively. With the aid of the FTIR and SEM measurement techniques, it was found that PASPG could induce the irregular growth of the CaCO₃ and CaSO₄ morphology and destroy the formation of crystals. On the other hand, the higher corrosion efficiency of 85.17 % was achieved by PASPG in comparison with PASP (72.53 %). PASPG is a mixed inhibitor and the adsorption of PASPG on the Q235 steel surface followed the Langmuir mono-layer adsorption isotherm. The formation of a protective film on the surface of carbon steel was proved by PASPG’s adsorption, which increased the resistance to be eroded. Thus, the surface of carbon steel can be effectively protected. The present work provides a simple and effective pathway for the synthesis of high-efficiency green scale and corrosion inhibitor, by introducing a functional group into the PASP chains. The implementation of such type of chemical modification method may also be an effective strategy for improving the efficiency of other polymers green scale and corrosion inhibitors.     

基于LSTM的浮选钼精矿品位软测量模型

战略性稀有金属钼矿品位低,组分复杂、嵌布粒度细等特点,其有价金属分离回收难。浮选作为微细粒钼矿分离回收的主要选矿方法之一,其浮选钼精矿品位一直是选厂的关键性产品指标。国内大多数选厂采取轮班制采样,人工化验得到精矿品位结果,但此方式严重滞后于浮选工艺,难以满足对生产过程进行实时监测和操作指导。LSTM是一种特殊的循环神经网络,引入门机制有效的传递或选择性遗忘长时间序列中的信息,解决RNN中的长期依赖、梯度消失和爆炸问题。本文分析整理东坡选厂中各平台源数据,结合选厂浮选工艺及机理,筛选出多个影响浮选钼精矿品位的变量作为模型输入;将输入变量进行异常值判定,缺失值填充和数据降噪等数据预处理,建立高质量浮选钼精矿品位数据库;软测量模型采用PyCharm软件编码,使用BatchNorm批量规范化处理样本数据,加入Dropout正则化防止过拟合,建立基于LSTM的浮选钼精矿品位软测量模型,通过前向传播算法更新神经网络结构参数,并于Linear模型和CNN模型的预测性能指标结果比较。结果表明：基于LSTM的浮选钼精矿品位软测量模型预测准确度高,样本数据误差波动平稳,浮动范围小,模型泛化能力强,模型平均绝对百分比误差MAPE为1.13%,均方根误差RMSE为0.7049%,决定系数R2为0.8763,实现了浮选钼精矿品位的在线预测。     

Quantitative surface-enhanced Raman measurements with embedded internal reference

Analytical applications of SERS are often more associated with qualitative than quantitative analysis, because of the difficulty in obtaining quantitative SERS results. In this paper we introduce a new strategy to quantitatively measure the SERS signals of analytes based on Au-core/Ag-shell nanoparticles with embedded 4-aminothiophenol as the internal reference. Successful detections of two analytes, Toluidine Blue O in aqueous solution (detection limit of 0.1 μM) and melamine in milk (detection limit of ∼5 μM), are demonstrated. The improvement in the linear fitting illustrates that the use of internal reference significantly improves the accuracy of the quantitative SERS measurements. The successful detection of melamine in milk illustrates the versatility of this detection scheme for a wide variety of analytes.     

Sensor–actuator system for dynamic chloride ion determination

Chloride is a crucial anion for various analytical applications from biological to environmental applications. In order to measure the chloride ion concentration, a measurement system is needed which can detect this concentration for prolonged times reliably. Chronopotentiometry is a technique which does not need a long term stable reference electrode and is therefore very suitable for prolonged ion concentration measurements. As the used electrode might be fouled by reaction products, this work focuses on a chronopotentiometric approach with a separated sensing electrode (sensor) and actuating electrode (actuator). Both actuation and sensor electrode are made of Ag/AgCl. A constant current is applied to the actuator and will start the reaction between Ag and Clˉ, while the resulting Clˉ ion concentration change is observed through the sensor, which is placed close to the actuator. The time it takes to locally deplete the Clˉ ions is called transition time. Experiments were performed to verify the feasibility of this approach. The performed experiments show that the sensor detects the local concentration changes resulting from the current applied to the actuator. A linear relation between the Clˉ ion concentration and the square root of the transition time was observed, just as was predicted by theory. The calibration curves for different chips showed that both a larger sensor and a larger distance between sensor and actuator resulted in a larger time delay between the transition time detected at the actuator and the sensor.     

A new device for in-line colorimetric quantification of polypropylene degradation under multiple extrusions

An in-line colorimeter that is able to quantify color changes in real time during extrusion was developed and validated. It is composed of LEDs emitting at three different wavelengths and a photocell that measures the intensity of the light transmitted through the polymer melt flow. The colorimeter was validated at the bench by employing colored aqueous solutions and in-line during the extrusion of a colored polypropylene. Furthermore, it was used to in-line quantify the color changes in a polypropylene as generated over multiple extrusions due to thermo-mechanical degradation. The technique was proved to be fast and suitable to measure color changes in real time during extrusion.     

臭氧氧化结合湿法喷淋对玻璃窑炉烟气同时脱硫脱硝实验研究

采用臭氧氧化结合湿法喷淋对模拟玻璃窑炉烟气开展了同时脱硫脱硝实验研究.采用不同溶液(NaOH、Na₂S)进行了喷淋实验.结果表明,保证溶液pH值在10以上,NaOH浓度对NO_x脱除效率无影响,SO₂的存在促进了NO_x吸收.当O₃/NO物质的量比为1.6、溶液NaOH浓度为0.5%时,NO_x脱除效率可达70%,SO₂脱除效率在99%以上.往喷淋液中添加Na₂S,NO_x脱除效率随Na₂S浓度增加而提高,SO₂的存在对NO_x脱除效率无影响.当O₃/NO物质的量比为1.2、溶液中NaOH浓度为0.5%、添加剂Na₂S浓度为0.6%时,NO_x脱除效率可达70%,SO₂脱除效率在95%以上.60 min长时间运行实验证明,模拟烟气中的NO_x经碱液和添加剂吸收后主要以NO^-₂的形式存在于喷淋液中,且NO_x脱除效率不随溶液pH值的变化而变化.     

DMA-80测汞仪的应用探讨

本文的主要实验目的是利用DMA-80测汞仪直接测定固体样品中的汞并证明其方法可靠。采用升温加热直接进行热分解、金汞齐反应,采用长、短双检测池,可直接测定固体、液体样品,汞含量在0.n×10-9～600.0×10-9范围内的样品都能被很准确地测定,每个样品测定时间约为5min。 测试结果证明其方法具可靠性。     

微波消解-磷钼蓝分光光度法测定钨矿石中的磷含量

针对钨矿石中的微量元素磷,采用混合酸快速微波消解结合磷钼蓝分光光度法进行测定。经选择优化样品的微波消解和实验测定条件,结果表明:HCl+HNO3+HF的混合酸微波消解后的样品,在硫酸介质中,有钼酸铵存在时,用抗坏血酸将磷还原成磷钼蓝络合物,在825nm处比色测定。方法的加标回收率为98.9%~101.6%,结果准确可靠。硅在熔样过程中挥发除去不会干扰测定,砷会干扰实验,可在酸介质中加入碘化钾,使砷还原至低价而不干扰磷的测定。